Tasks Completed

  • Change engine oil and oil filter
  • Check and adjust valve clearance (replace valve cover gaskets, sealing nuts and washers)
  • Replace spark plugs
  • Replace air filter element
  • Replace fuel filter
  • V-Belt: check condition and tension, correct if necessary
  • Fuel system: Visual inspection for damages, clearance and tightness of line connections
  • Check tightness of hose connections on the crankcase ventilation
  • Intake air: Check hoses, lines, and connections for tightness
  • Check accelerator linkage for smooth operation and full throttle opening
  • Check accelerator linkage for smooth operation
  • Parking brake: Check free travel of parking-brake lever
  • Brake fluid: Check level
  • Brake system: Visual inspection of brake pads and brake discs to check for wear
  • Check and correct manual transmission/final drive oil level
  • Check and adjust clutch and brake pedal free play
  • Check clutch and brake system, all lines and hoses (include wear and leaks)
  • Tyres and spare wheel: Check condition and correct tire pressure
  • Steering gear: Visual inspection of the bellows for damage and bolt connections for tightness
  • Tie rods: Check play and dust boots
  • Ball joints: Visual inspection of dust boots for damage, check tightness of wheel alignment adjustment/mounting bolts
  • Drive shafts: Visual inspection of boots for leaks and damage
  • Exhaust system: Visual inspection for leaks and damage; check tightness
  • Seals for doors, hood and roof/top: Remove rubber residue from body seal contact areas, apply suitable lubricant
  • Check and lubricate door hinges and door check rods
  • Door locks, hood locks and safety hook on front hood: Check that they are adjusted and function properly
  • Seat belt: Check operation and condition
  • Vehicle lights: Check operation and headlight alignment
  • Horn: Check operation
  • Windshield washer, headlight washer: Check fluid level, nozzle aim and washer fluid anti-freeze protection level for the winter season and check wiper system operation
  • Battery: Check electrolyte level and hydrometer test
  • All other electrical equipment as well as indicator and warning lights check operation
  • Set ignition timing
  • Set K-Jet Idle mixture
  • Road Test: Brake pedal, parking brake, clutch, steering, heating, air conditioning and instruments: Operations test.
  • Oils and fluids: Visual inspection for leaks

Parts Replaced

  • Engine Oil
  • Oil Filter
  • Valve Cover Gasket Set
  • Spark Plugs
  • Fuel Filter
  • Air Filter